The four light bulb types used in residential recessed lighting are incandescent, halogen, compact fluorescent (CFL), and light emitting diode (LED). Incandescent aka traditional light bulbs are the oldest and least efficient technology.
.
Keeping this in consideration, can LED bulbs be used in recessed lighting?
LED light bulbs and conventional recessed can lights are not always compatible. Some of the LED light bulbs used in halogen and incandescent recessed lights might cause a heat sensor inside the housing to trip your circuit breaker.
Similarly, how deep should the bulb be in a recessed light? Most residential downlights top out at 7 ½” deep, meaning they will generally fit. Shallow recessed lighting is available if you don't have much room. Most shallow recessed light fixtures are only 5” deep or less. There are deep housings available if you have extra room.
Similarly, what size bulb for can lights?
You'll want light bulbs for recessed lighting that fit nicely within your can with plenty of room for you to insert the light bulb. Light Bulb sizes are diameter of the bulb and are the following: 1 3/8" (MR11), 2" (PAR16, MR16), 2 1/2" (PAR20, R20), 3 3/4" (PAR30, R30), 4 3/4" (PAR38), 5" (R40).
Should I use 4 inch or 6 inch recessed lights?
Size and Layering Size recommendations say to place 4-inch lamps 4 feet apart and 6-inch lamps 6 feet apart. However, these are general guidelines. Smaller task or accent lighting using 2-inch or 3-inch lamps can work in conjunction with well-placed general recessed lighting.
Related Question AnswersWhat is the difference between can lights and recessed lights?
When making your decision, it is important to understand the differences between the two sources. General ceiling lights typically use incandescent or fluorescent light bulbs. Recessed lights are great options in situations with low ceilings as they do not protrude down from the ceiling.Is recessed lighting outdated?
5 Advantages of Recessed Canister Light Fixtures But recessed light fixtures usually are not very visible, making them a good choice where you want the light itself to be the design element, not the fixture hardware. The reason recessed lights never go out of style is that they have never really been in style.Are LED recessed lights worth it?
But LEDs have some advantages “To be specific, these are not light bulbs, but LED-designed recessed lights,” Flowers says “Obviously you have the longer rated life (50,000 hours in a reputable LED compared to maybe 10,000 in a CFL), but there are a couple of other aspects worth considering. LEDs don't.Do LED recessed lights get hot?
LED bulbs do get hot, but the heat is pulled away by a heat sink in the base of the bulb. If you have fully or semi-enclosed fixtures you need to light up, look for LEDs that are approved for recessed or enclosed spaces.How do you calculate recessed lighting?
To determine how far apart to space your recessed lights, divide the height of the ceiling by two. If a room has an 8 foot ceiling, you should space your recessed lights approximately 4 feet apart. If the ceiling is 10 feet, you'll want to put about 5 feet of space in between each fixture.What is the best recessed lighting for kitchen?
The 10 Best LED Recessed Lights on the Market| LED Recessed Lights | Wattage |
|---|---|
| Hyperikon Recessed LED Downlight | 14W |
| Lithonia Lighting WF6 LED 30K Recessed Ceiling Light | 13W |
| Globe Electric Recessed Lighting Kit Dimmable Downlight | 7W |
| Sunco Lighting Baffle Recessed Retrofit Kit Dimmable LED Light | 13W |
Can I put an LED light bulb in any fixture?
The simple answer is yes, as long as the LED bulb uses less wattage than your fixture. However, LED's do not emit dangerous levels of heat. Thus, if your fixture says “not to exceed 60-Watts” but you want to use a 100-Watt equivalent LED bulb, this would be safe to do so.How do I know what light bulb I need?
Steps- Look for the right wattage.
- Pay attention to the lumens.
- Look at the shape of the bulb.
- Check the 'life expectancy' of the light bulb.
- Make note of the 'light appearance' of the bulb.
- Look at the energy cost of the bulb.
- Check the mercury content of the light bulb.
