How much does a Douglas fir cost?

In February 2018, the weighted average price of Douglas fir export logs was $887/MBF, which is 26 percent higher than the February 2017 price of $706/MBF.

.

Similarly, it is asked, is Douglas fir wood expensive?

If wood strength and hardness matter to you, choose Douglas-fir wood over whitewood. Fir is harder and stronger than pine, spruce or hemlock, and it's less likely to have knots or other blemishes. It may be more expensive but probably not as expensive as a hardwood like oak unless it's clear fir.

Beside above, how Long Will Douglas fir last outside? 10-15 years

People also ask, how much are Douglas fir trees worth?

Prices in October crested the $770/MBF mark, and they have consistently remained above the $700 level since early 2Q2017. We predict high-quality Douglas fir logs in some regions of western Oregon and Washington will be near the $850/MBF price level during December and into January.

How many board feet does a Douglas fir have?

So, I decided to do a rough calculation of an average Douglas fir, 228 feet tall, 20 inches wide. Loggers use a table to determine how many board feet they can make per 16 foot log. Out of our hypothetical tree, we can expect about 14 logs. According to the Scribner rule, each 16 foot log will yield 280 board feet.

Related Question Answers

Will Douglas fir warp?

Douglas Fir can be very pretty. However, most Doug Fir is sold green -- soaking wet. It can be used for building houses in that state, but not so much for furniture. It will dry and shrink and likely warp.

Is Douglas fir toxic?

Allergies/Toxicity: Although severe reactions are quite uncommon, Douglas-Fir has been reported to cause skin irritation, nausea, giddiness, runny nose, along with an increased likelihood of splinters getting infected. See the articles Wood Allergies and Toxicity and Wood Dust Safety for more information.

Is Douglas fir better than cedar?

Douglas fir, though, is more resistant to decay, which makes it much better outdoors. Douglas fir is more expensive than ordinary pine, but is usually fairly comparable to cedar.

Is Douglas Fir good wood?

Douglas fir falls in the gymnosperm, or softwood category. So is it a hardwood? Technically no. However, if what you're really asking is whether or not Douglas fir is a tough, strong building material, the answer is yes—it's widely known as a very durable wood.

Is Douglas fir stronger than cedar?

While Cedar is easier to work with and more rot resistant being of the Type II durability class, Doug Fir is stronger and of Type III durability.

Does Douglas fir stain well?

Douglas fir is light-amber in color with a somewhat benign character if not properly stained to bring out the minimal grain patterns. Douglas fir can be beautiful in the right hands using the right stain. Part of the key is to open pores with sandpaper to allow stain penetration.

Is Douglas fir wood weather resistant?

As with any wood, fir is susceptible to changes in humidity and cannot be made truly waterproof without being chemically treated, or coated with a waterproof coating. The most common lumber fir is the Douglas fir.

What are the properties of Douglas fir?

The wood of the Douglas fir is medium-weight and, in comparison to other coniferous woods, fairly hard. It is subject to low shrinkage and has good stability. It is strong and elastic. The wood is also resistant against fungal and insect infestation and exhibits good natural durability when exposed to the elements.

Are pine trees worth money?

Your large pine trees may be valuable to timber-harvesting companies that sell them for lumber. The largest trees supply a greater volume of wood that can be milled into boards, siding and framing materials.

What trees are worth the most money?

10 Most Profitable Trees To Grow
  • Instant shade trees. Landscapers and homeowners often want larger, more mature trees to provide “instant shade” in a year or two, and are willing to pay much higher prices for those trees.
  • Flowering dogwood.
  • Thornless locust.
  • Heritage fruit trees.
  • Hybrid chestnut.
  • Black walnut.
  • Bonsai trees.
  • Willow.

How much can you sell a tree for?

The value of this tree would be $195.00 for an average of $866.00 per thousand board feet. A fourteen inch Red Oak with a grade 3 rating would be worth $12.00 for an average price per thousand board feet of $265.00.

How do you calculate the value of a tree?

The formula is: Tree Value = Base Value x Cross-sectional Area x Species Class x Condition Class x Location Class Base Value is the dollar amount assigned to 1 square inch of a tree's trunk cross-sectional area and is typically based on the cost of the largest available replacement plant of the same species.

Do you need to treat Douglas fir?

It's naturally durable so is good for use externally and will fare better than other softwoods in the ground and if it's not being used as a fencepost (!… time we got some new timber durability classifications!) then it doesn't need treatment.

Is Douglas fir better than pine?

Pine has broad grain lines that wander, making it far weaker than fir. The soft wood between the grain lines shrinks and expands, making the wood cup or twist. For stability and strength, fir is much less prone to warping or twisting, and much stronger than pine.

How long will untreated pine last outside?

Untreated redwood, depending on it's age, has a projected life span of 50 years or more when exposed to the elements. Pine varieties have a projected life span of only 5 to 10 years.

Can you paint Douglas fir?

Douglas fir can be sanded very smooth and it takes paint extremely well. You can apply semi-gloss paint (over primer, of course), or even high-gloss to achieve a sleek, smooth look. You may have to search out a specialty lumber dealer to find Douglas fir, since it's not carried in most home centers.

Will pressure treated wood rot in concrete?

Pressure treated wood will eventually rot in concrete.not nearly as quickly as untreated, but it WILL eventually.

Does Douglas fir need to be pressure treated?

Home Depot only carries the pressure treated ones. Fancy, expensive lumber yard only carries Douglas Fir. Douglas Fir is what is pressure treated, redwood cedar or oak would survive, pine most likely would be gone in a couple years. Pressure treated lumber is to protect from insects and mold it can still get dry rot.

You Might Also Like