How do you turn off the maintenance required light on a 2003 Honda Odyssey?

To reset this Honda Odyssey maintenancelight, you must simply locate your ODO / TRIP button which isshown below. Depress this button and hold it down, while insertingyour key and turning to the ON position. Keep this buttondepressed until your MAINT REQD light begins to flash anddisappear.

.

Thereof, how do you turn off the maintenance required light on a Honda Odyssey?

Push and hold down the "select/reset" button forapproximately 10 seconds until the maintenance-requiredlight starts to blink on and off. Push and hold the"select/reset" button for about five more seconds until themaintenance light resets.

Beside above, what does the maintenance required light mean on a 2002 Honda Odyssey? The MAINT REQ'D light becomes lit whenyour car travels a certain number of miles. It is basically areminder that it is time to have your car's scheduledmaintenance (oil and oil filter change) done. The car shouldnot be running when performing these steps. ---- 2 Press and holdthe select/reset knob.

In this manner, what does the maintenance required light mean on a Honda Odyssey?

The routine 5,000-mile service called for by themaintenance required light in a Toyota or Lexus, forexample, includes an engine oil and filter change, tire rotation,multi-point inspection, as well as an inspection and adjustment ofall fluids. Service requirements for different makes and models mayvary.

How do you reset the maintenance light on a 2003 Honda Pilot?

2003-2005

  1. Turn the ignition switch to the OFF (0) position.
  2. Press and hold the Select/Reset button(s) in the instrumentpanel, then turn the ignition switch to ON (II) position.
  3. Hold the button(s) for 10 seconds or until the indicatorresets.
Related Question Answers

What does it mean when the maintenance required light is on?

The maintenance required light is notifying youthat maintenance is required according to the drivendistance on the vehicle's maintenance schedule. Most oftenthis just means your vehicle might be due for an oilchange.

How do you reset the maintenance light on a 2005 Honda Odyssey?

Reset the Oil Maintenance Light on a 2005-2015 HondaOdyssey:
  1. Turn the ignition to position “On” without startingthe engine.
  2. Press the Select/Reset button until it displays the “oillife percentage”
  3. Then, press and hold the knob until the oil life percentagebegins to blink.
  4. Release the knob.

How often should you change your oil?

Most cars can go at least 5,000 miles before an oilchange. Change your car's engine oil everythree months, or 3,000 miles.” At one time, that was standardauto advice.

How do you reset the oil light on a Honda Odyssey?

Press and hold the “Select/Reset”button on the instrument panel. While continuing the hold the“Select/Reset” button, turn the ignition“ON“. Do not start the engine. Still continue to holdthe button(s) for 10 seconds or until the indicatorresets.

What is routine maintenance required?

Understanding the Mitsubishi Routine MaintenanceRequired and Service Indicator Lights. If the driver neglects aservice light, such as the “ROUTINE MAINTENANCEREQUIREDlight, he or she runs the risk ofdamaging the engine - or worse, ending up stranded on the side ofthe road or causing an accident.

What does Maint req d?

The MAINT REQ'D light becomes lit when your cartravels a certain number of miles. It is basically a reminder thatit is time to have your car's scheduled maintenance (oil and oilfilter change) done.

How do you turn off the maintenance required light on a 2002 Honda CRV?

Turn off the engine press it down and hold itdown, turn the ignition key to the on (not run position) andkeep the button down for 10 to 15 seconds it will reset themaint. light. To the right lower side of the instrumentcluster is the reset button.

How do you reset the service light on a Honda?

Press and hold the “Select” and“Reset” switch at the same time. Continue tohold both buttons while turning the ignition to the“RUN” position. Do not start the engine. Still holdboth “Select” and “Reset” for 10seconds.

How do you turn off the maintenance required light on a 2002 Honda Civic?

These are the steps:
  1. Turn the ignition switch to the OFF position.
  2. Press and hold the SELECT/RESET button.
  3. While holding the button down, turn the ignition switch to theON position (but without cranking or starting the engine).
  4. Hold the SELECT/RESET button for about 10 seconds.

You Might Also Like