How do you make lined curtains with a rod pocket?

  1. Measure the circumference of the curtain rod.
  2. Install the curtain rod in it's designated place on the window or wall.
  3. Measure the width of the rod, from side to side inside the end brackets.
  4. Cut the drape fabric equal to twice the width of the rod.
  5. Turn the hem on the face fabric up 3 inches twice and press.

.

Similarly, you may ask, how do you hang rod pocket curtains on a traverse rod?

How to Hang Non–Pinch-Pleated Drapes on a Traverse Rod

  1. Turn the drapery panel inside out and check for the presence of heading tape.
  2. Measure the space from the wall to the front of the carrier on the traverse rod.
  3. Indicate pin placement marks along the top of the back of the drapes by inserting a straight pin, perpendicular to the top edge, equidistant across the panel.

Furthermore, what is a rod pocket curtain? Rod pocket curtains, also called pole top or casement curtains, are a classic, and classy, way to hang drapery. A casing sewn onto the back of the curtain panel at the top allows the rod to slip through unseen. Panels bunch in gathers on the rod for a soft look with clean lines.

Then, what to do with old sheer curtains?

Creative Uses for Sheer Curtains

  1. 1 Update a Headboard.
  2. 2 Decorate a Traditional Bed Frame With a Canopy.
  3. 3 The Best Ways to Use Tulle Fabric to Decorate.
  4. 4 Decorate the Poles on a Girl's Canopy Bed.

How wide should rod pocket curtains be?

The rod pocket for a curtain rod is generally 1 1/2 inches in width for either ready made or custom curtains, the first being single and the other double. There can also be a top ruffle added above the rod pocket which can be 1, 2 or even 3 inches in height.

Related Question Answers

Is it easy to make curtains?

Making curtains is easy, but only if you know the basics Sewing a curtain. Curtains are almost all straight sewing, making them an easy project for beginners. That said, there are still some basics to master before embarking on sewing curtains for the first time.

How do you sew two lined curtains together?

Instructions for Sewing Curtain Panels Together
  1. Unstitch the vertical side seams on two curtain panels that you plan to sew together.
  2. Unpick the stitching in the top sleeve and on the bottom hem.
  3. Iron the side seam marks flat along the entire length of both panels.
  4. Place panels right-sides together and pin.
  5. Stitch a 5/8-inch seam end to end, joining both panels.

How do you make lined curtains with eyelets?

Pin the eyelet tape along the top edge of the fabric and sew into place. Draw around the inside of each ring with a fabric pen, then cut out these circles to create the eyelet holes. 3) Press the eyelets into place at the front of the curtain. Fold the bottom 2cm of the panel under and lightly iron.

How do you sew blackout lining into curtains?

Gather your material and lay it flat on the floor, right side facing down. Place the blackout lining inside the fabric, with the right side facing up. Fold the hems over the blackout lining, and pin in place around all of the corners and edges. Next, sew all the edges together to connect the lining to the curtain.

How do you make lined tab top curtains?

Attach the tabs to the curtain. Fold the tabs in half (with the seam on the inside) and place them upside down on the curtain, lining up the raw edges of each tab with the raw edge of the top of the curtain. Pin the tabs in place. Sew each tab to the top of the curtain using a half-inch (1.3 cm) seam allowance.

How much should I line my curtains?

Right around $6.00 to line each curtain.

What is the difference between lined and interlined curtains?

Both standard and blackout lined curtains are also available with interlining. Interlined curtains have an additional layer of fabric in between the lining and face fabric. Interlined curtains form more rounded, fuller pleats and have an opulent, sumptuous appearance.

What do you line curtains with?

If you're lining curtains to hang in the home, you should look for liner material made from 100 percent cotton, polyester, or a combination of the two. Curtain liners designed for use in the home are created to repel water, resist stains, provide insulation and prevent ultraviolet rays from entering the home.

Do I need to line curtains?

Thinner cotton or polyester curtains should be lined, however, to stop them looking washed out. Even top treatments can be worth lining, because it will help to extend their life, and stop them fading. It's relatively easy to add lining to the back of your curtains.

Where do hooks go on pinch pleat curtains?

After inserting a few hooks it can be worth holding the curtain to the track or pole to check that the hooks have been positioned correctly. Pinch pleat curtains should hang under a pole and in front of a track. Hooks can be added in between the folded pleats if necessary to support heavier curtains.

How do I make grommet curtains?

Cut all of the circles out all the way around, then line up the grommet tape with the holes and pin it down again. With coordinating thread to your front fabric, sew down the grommet tape all the way around. Lastly, pop on the grommets on top of each of the holes, then hang your new grommet top curtains.

You Might Also Like